Model name: FCX2000-60VC FCX2000-120VC FCX2000-180VC FCX2000-120ES (*1)
Configuration: Digital servo system, Flatbed
Media hold-down method: Vacuum suction - Electrostatic (*1)
Effective cutting area: 610mm x 920mm 1200mm x 920mm 1800mm x 920mm 1200mm x 920mm
Mountable media (Y-axis): 950mm (37.4 inch)
Roll media support: Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg
Maximum cutting speed: 400 mm/s (1 to 40 cm/s in 16 steps), in all directions
Cutting force: Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf)
Cutting force settings: Tool 1: in 40 steps, Tool 2: in 40 steps
Minimum character height: Approx. 3 mm square (Approx. 0.12 inch) (varies with character font and media) (*2)
Programmable resolution: GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm
Distance accuracy: Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (value after distance correction / excluding contraction of media, in plotting/cutting mode) (*2)
Perpendicularity: Max 0.5 mm / 900 mm (excluding contraction of media, in plotting/cutting mode)
Repeatability: Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2)
Display: Graphic type LCD (240 dots × 128 dots), supports Japanese, English and Chinese
Standard interfaces: RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX)
Command sets: GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data)
Number of tools: Two tools
Cutting blade, pen, and tool types: Cutting blade (super steel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool (*7)
Power source: 100 to 240 VAC, 50/60 Hz (Auto switching)
Power consumption: Max. 140 VA
Operating environment: Temperature: +10 to +35 ºC, Humidity: 35 to 75% RH (non-condensing)